Adjustments for SectionControl

Section Control Call-up Settings

Menu sequence for Section Control settings

image001

Fig. 1

 

1. Press soft key (B) in « Section Control info. »

2. The « Section Control settings » page appears.

 

Soft keys

Fendt Section Control_Adjustments_3

Fig. 2

 

A. Toggle switch

NOTE: Soft key is greyed out if there is no boundary.

  • « MAN »: Manual shifting of section widths
  • « AUTO »:  Automatic  shifting  of  section widths by Section Control

B. Toggle switch for « Skip headland » function

C. Call up « Section settings details » page

H. Jump back one menu level

 

Display

Fendt Section Control_Adjustments_4

Fig. 3

 

A. Connected device

B. Trailer type

C. Display preselection Section Control active or Display inactive

D. Overlap in field (in 25 percent increments)
NOTE: Can only be selected if a boundary has been included in VarioGuide.

E. Overlap to field boundary (in 25 percent increments
NOTE: Can only be selected if a boundary has been included in VarioGuide.
F. Info box: Settings for boundary and headland in VarioGuide

 

Switch section widths automatically or manually

image004

Fig. 4

 

A prerequisite for automatic section width switching

C. Display Section Control preselection active or
inactive
NOTE: Automatic section width switching only possible:

  • Section Control Preselection (C) is active.
  • Boundary was included in VarioGuide.

 

Switch section widths automatically

image005

Fig. 5
1. Activate toggle switch (A) « AUTO » and automatic switching of section widths is activated.

NOTE: Toggle switch can be activated only if the display Section Control preselection is active. Switch section widths automatically

 

Switch section widths manually

image006

Fig. 6
1. Activate toggle switch (A) « MAN » and manual switching of section widths is activated.
NOTE: If a section is controlled manually, it will remain manually controlled until switched to automatic again.

 

Select/set implement

Select Implement

image007

Fig. 7

 

NOTE: If several implements are Section Control compliant, one implement can be selected and adjusted on this page.

1. Choose implement selection field (A) by screen touch or with external control panel and select in the pop-up.

 

Select trailer type

image008

Fig. 8

 

1. Select trailer type selection field (B) by screen touch or with external control panel.

 

image009

Fig. 9

2. Select trailer type by screen touch or with external control panel.

3. Confirm selection with soft key checkmark

 

Set overlaps

Set overlap in the field

image010

Fig. 10

 

1. Choose selection field (D) by screen touch or with external control panel.

2. Use the scroll wheel on the external control panel to select overlap in the field in 25 percent increments.

NOTE: The icon to the right of the input field changes appearance according to the overlap set.

 

Set field boundary overlap

image011

Fig. 11

 

1. Choose selection field (E) by screen touch or with external control panel

2. Use the scroll wheel on the external control panel to set the field boundary overlap in 25 percent increments.

NOTE: The icon to the right of the input field changes appearance according to the overlap set.

FacebookTwitterEmailShare