Compass Calibration

Auto Steer Setup screen

System150 GX-45_Compass Calibration_FIG 2

1. Select Compass to enter the Compass Calibration screen

Compass calibration screen

System150 GX-45_Compass Calibration_FIG 3

2. Follow the on screen prompt to perform the compass calibration. First you will be required to drive your vehicle to a level surface. Once you have done this, select the yellow arrow to go to the next step

Drive in a circle

System150 GX-45_Compass Calibration_FIG 4

3. Next you will be asked to drive in a circle for one and a half revolutions. Maintain a low speed while you are doing this. Select next once you have completed this step

Stop the vehicle

System150 GX-45_Compass Calibration_FIG 5

4. Stop the vehicle when prompted and select next. If the calibration is successful it will be stated on the screen

5. Select the green tick to return to the Auto-steer Setup screen