Auto-Guide™ 3000 Basic: Wayline Setup

Wayline setup (Advanced and Basic)

A wayline defines the line of travel the machine will follow.

There are four types of waylines:

  • AB wayline
  • A+ heading
  • Contour
  • Pivot

There few ways to reach the wayline menu:

  • After pressing “GO” button and selecting Implement profile, wayline selection will appear (Basic mode):

WaylineSetup_FIG1-3

  • From the main guidance screen (Advanced mode):

WaylineSetup_FIG4

  • From the system setup menu (Advanced mode):

WaylineSetup_FIG5

We can make a new wayline or load previously created line from USB drive or internal memory.

From the loading page, it is possible to delete a wayline as well from the internal storage of C1000.

To load the Wayline:

WaylineSetup_FIG6-9

To create a new wayline, please select options as follows:

WaylineSetup_FIG10

1. Select WaylineSetup_PathPlusIcon (1). Changing the name of the wayline is optional. Select the wayline name box to change the name.

2. Select WaylineSetup_RCheckIcon (2).

3. Select the desired wayline icon (3) and follow the prompts. See the information for making each type of wayline.

AB waylines

WaylineSetup_FIG11

Making an AB wayline

Make and name the wayline before selecting the type of wayline.

WaylineSetup_FIG12

WaylineSetup_FIG12B

WaylineSetup_FIG12C

A+ heading wayline

WaylineSetup_FIG13

Making an A+ headling line

Make and name the wayline before selecting the type of wayline.

WaylineSetup_FIG14

WaylineSetup_FIG14B

Contour Waylines

WaylineSetup_FIG15

Making a contour wayline

WaylineSetup_FIG16

WaylineSetup_FIG16B

Pivot Waylines

WaylineSetup_FIG17

Making a pivot wayline

WaylineSetup_FIG18

WaylineSetup_FIG18B

FacebookTwitterEmailShare