Auto-Guide™ 3000 Basic: Task Setup

Making a task

fig 14

Fig 14

 

1. Select the icons in the following order:  3 together

2. If desired, change the default task name:

NOTE: These steps are optional. If using the default task name, go to the next numerical step.
a) Select the task name box (1).
b) Enter the desired task name on the keyboard.
c)  Select grey chk.

Other information on the screen about the customer, farm, and field is optional. See the information for customer setup, farm setup, and field setup.

3.  Select grey chk twice to return to the main screen.

 

 

 

Selecting a task

A task must be made on the terminal or imported from an external source before selecting a task.

fig 15

Fig 15

1.  Select folder paper.
2. Select the task name box (1).
3. Select the desired task from the drop-down list.
4.  Select grey chk.

If a task has been run before, task information will show on bottom of the screen. If there is more information available than can be shown on the screen, the mult paper arrow is available.

 

 

Editing a task

A task can only be changed if:

• The task was made on the terminal, and

• The task status is initial.

 

The edit icon is grayed out and not available if:

• The task was imported to the terminal, or

• The has has been used.

 

fig 16

Fig 16

1.  Select folder paper.

2. Select the task name box (1).

3. Select the desired task from the drop-down menu.

4.  Select paper pencil.

 

fig 17

Fig. 17

5. Select the task name box (1).

6. Change the task name on the keyboard.

7.  Select check.
Other information on the edit task screen about the customer, farm, and field is optional. See the information for customer setup, farm setup, and field setup.

8.  Select check twice to return to the main screen.

 

Removing a task

fig 18

Fig 18

1.  Select folder paper

2. Select the task name box (1).

3. Select the desired task from the drop-down list.

4. Select the icons in the following order 3 togeth x chk.

 

 

FacebookTwitterEmailShare